alarm chirp

would anyone help me out on how to figure a way to make the alarm horn chirp at the touch of a button from the inside of the car, without arming/disarming the actual alarm? so pretty much a button hooked up to the alarm horn. thanks for the help.

you need to hit the red wire on the alarm siren with 12v. just use a switch and supply 12v to it and run the other side of the switch to the red siren wire and your done.

how would i supply the 12 volts to it? like where would i run the wire to?? thanks for the help again.

will putting 12V on that line cause a problem for the circuit that is supposed to be activating the siren ? I would think you would have to isolate it .........

you don,t need to isolate it, it is dioded in the brain. take 12v from the ignition coloum or behind the radio, or the open slot in the top of the fues box.