engine swap?

what would be a good engien sway for the 93 and up RX-7s? the rotoary engien runs way too hot, and needs to be replaced every 45,000 miles or so

would an Sr20det? be a good one, the HP is about the same, its turbo, its 2 liters instead of 1.3, rear wheel drive, also, it would run a lot cooler, and should be mroe reliable, what do you guys think?

this is for a realistic thing, dont say, putting in a supra engine or some thing like that, cuz that owul dbe way tooooooo expensive

hmm...
putting any other motor in it at all would be expensive.

there's already an rx7 with the 2jzgte swap in it.
it's yellow.

if you modify your cooling and oiling system, you're not going to have the "super hot" motor thing going on.

the cars are under cooled from mazda directly to save weight.

add some more to it, keep it well tuned, don't overboost, and the rotary will be your best friend.

Originally posted by supratuner
what would be a good engien sway for the 93 and up RX-7s? the rotoary engien runs way too hot, and needs to be replaced every 45,000 miles or so
you meen rebulid the engine? You really dont have to rebulid the engine until like 80-100k, even more if you take care of it and if its running strong. After it's been rebulit, its almost like a whole new engine. If you take care of it by changing the oil, air filter, plugs, coolant and reving upto the red line once in a while, it should run real well. If you really dont want a rotary engine, buy another car, thats all i can say. I'd get an Integra GS-R, those are the shizniz besides RX-7's of course =)

you don't have an RX-7, nor will you ever have one. so why are you asking this? :confused:

SR would take ALOT to fit...

Originally posted by S13_Iketani
you don't have an RX-7, nor will you ever have one. so why are you asking this? :confused:

SR would take ALOT to fit...

i would buy an RX-7 before i would buy a supra, i have more of a chanve to buy an RX-7 for how cheap they are, my friend, thats addicted to them, put down buying a 94 RX-7, for$4000 USA, but it had no motor, so thats why im asking. ive seen that a new motor all together costs about $3-4000. so i was just wondering.

get a jdm 3 rotor rx7 motor then install a big ass fmic and a fluidyne radiator following with a 1.3 bar radiator cap and you shoudl be ok ;)

Theres no such thing as a JDM 3 rotor RX7 engine. The 3 rotor (or 20B) only came in the cosmo.

has anyone heard of 26B 4 rotor swaps? the only one ive seen is in a JC cosmo, im not sure if the rx-7 engine bay will take it but it seems like it should.