Fuse for Third Brake Light
TZ250
02-02-2010, 06:21 AM
Does anyone know where the fuse is for the third brake light? I'm assuming, for now, that a fuse is bad because both bulbs won't light.
TIA!
TIA!
BNaylor
02-02-2010, 07:13 PM
What year Regal is this?
For 1997 and up there is no fuse for the third brake light.
For 1997 and up there is no fuse for the third brake light.
TZ250
02-15-2010, 06:54 PM
What year Regal is this?
For 1997 and up there is no fuse for the third brake light.
It's a 2002. I've looked and looked for the fuse. :) It's possible that both bulbs went out at the same time, but I assumed that a fuse would cause that problem. I couldn't get the socket out to test for voltage.
My next step will be to get the bulbs out and check them. Is there a LED equivalent to the 3155?
For 1997 and up there is no fuse for the third brake light.
It's a 2002. I've looked and looked for the fuse. :) It's possible that both bulbs went out at the same time, but I assumed that a fuse would cause that problem. I couldn't get the socket out to test for voltage.
My next step will be to get the bulbs out and check them. Is there a LED equivalent to the 3155?
BNaylor
02-16-2010, 06:33 AM
It's possible that both bulbs went out at the same time, but I assumed that a fuse would cause that problem.
Very possible both lamps are burnt out. I've had the issue in our ''99 Regal LS.
Very possible both lamps are burnt out. I've had the issue in our ''99 Regal LS.
TZ250
03-03-2010, 07:44 PM
How do I get the bulbs out? I tried twisting clockwise and counterclockwise, pushing up and pulling down. The amp blocks the drivers side bulb, but it will be easy to remove.
I don't want to break the housing. Is there a trick to this?
I don't want to break the housing. Is there a trick to this?
gjwickline
03-03-2010, 07:51 PM
there is a seperate brake light switch on the brake pedal for third brake light. check for proper operation there,
HotZ28
03-03-2010, 09:31 PM
Is there a LED equivalent to the 3155?Yes, Click Here (http://www.dav-electronics.com/led-3157.htm)
BNaylor
03-07-2010, 10:57 AM
How do I get the bulbs out? I tried twisting clockwise and counterclockwise, pushing up and pulling down. The amp blocks the drivers side bulb, but it will be easy to remove.
I don't want to break the housing. Is there a trick to this?
1/4 turn counterclockwise.
I don't want to break the housing. Is there a trick to this?
1/4 turn counterclockwise.
phuongtim39
03-24-2010, 11:16 PM
What year Regal is this?
For 1997 and up there is no fuse for the third brake light.
I accept with information: The amp blocks the drivers side bulb, but it will be easy to remove.
For 1997 and up there is no fuse for the third brake light.
I accept with information: The amp blocks the drivers side bulb, but it will be easy to remove.
Automotive Network, Inc., Copyright ©2026
