honda motor

do any of you guys know of any 1/24 scale (not 1/25) honda models with detailed motors. B series or h series, preferably. I know that the revell integra model has a detailed engine but it is 1/25, and slightly smaller tham i would like it to be.

I have yet to see any 1/24 scale Hondas with engine detail. It would be cool to see a 1/24 Prelude with engine detail for sure. Let me know if you should find anything.
Later IZ

Tamiya NSX kits have engines, als not sure, but I *think* Tamiya S800 comes with an engine. But most importantly, the Tamiya Prelude XX has an engine. But it's rare and OOP The only other option is to buy Sakatsu S2000 engine.

Originally posted by ales
Tamiya NSX kits have engines, als not sure, but I *think* Tamiya S800 comes with an engine. But most importantly, the Tamiya Prelude XX has an engine. But it's rare and OOP The only other option is to buy Sakatsu S2000 engine.

A lot of people would want the S2000 engine but it's going to cost an arm and maybe half a leg.:D http://www.hlj.com/cgi-perl/hljpage.cgi?SAK3307

great info about the prelude, thanks a million. I know where you can get the s2k motor for about 25 bucks.

i just went and checked out that prelude model, and it is a bit old. I know that the old preludes like that came with a bseries motor in one model form or another, but do you know if this one has a b series motor.

I dont remember the engine code on the old preludes, (the 83-87?) They were close to the 85-89 Accords, a single cam. I do know the 88-91's had either the old b20 or b21 depending on year. I want a 1/24 h22!!!!!! I want to build a copy of mine, but I think trying to fab a 1/24 h-series valve cover may be a little hard.
Later IZ

how were you planning on building a motor from scatch

You could use the Revell B-series block (though it would be a little small)
the hardest nearly impossible part would be the writing on the valve cover.

that is what i am trying to avoid

well you can scratch build it like Limited 24, im not sure how he did the valve cover though.

http://home.kimo.com.tw/enzo0101/cv_step/c_cvstep2.htm

holy shit that is amazing. how do i contact that guy

Originally posted by Ragnarok043
well you can scratch build it like Limited 24, im not sure how he did the valve cover though.

http://home.kimo.com.tw/enzo0101/cv_step/c_cvstep2.htm

thats soooo clean

what did he make that out of. is it like clay or something?

The one one I have found was my 85 Prelude from Tamiya and it only came with a SOHC carburated motor (scratch built an intake manifold and intake to look like fuel injection on it) other than this model I have not found any others.

well Limited 24 comes to this forum once in awhile. you can try to send him an email, heres the main page http://home.kimo.com.tw/enzo0101/c_index.htm. from the looks of it the engine is scratch built with plastic styrene.