Our Community is over 1 Million Strong. Join Us.

Stop Feeding Overpriced Junk to Your Dogs!

GET HEALTHY AFFORDABLE DOG FOOD
DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.
CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.
NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME
PROPER NUTRITION FOR ALL BREEDS & AGES
TRY GRAND FUTURE AIR DRIED BEEF DOG FOOD

97 Lumina 3.1 EGR Valve Testing


teegolf
12-25-2009, 11:27 AM
Continue to get a EGR low flow code on the car. I have removed the EGR to making sure it is clean and the plunger moves freely. Checked for clogging and debiris in ports and all appears OK. Is there a way to test the EGR valve itself by connecting it to 12 volts on a bench? Which wires at the plug supply currnet to the EGR and what activates them? Appreciate any help to test before I go buy a new EGR.

kenrap
12-25-2009, 12:03 PM
Give the following pdf a read, it should help.

http://www.wellsmfgcorp.com/pdf/Counterpoint3_4.pdf

Cheers!

teegolf
12-25-2009, 08:39 PM
Great article but I need information on how to test a single solenoid EGR and not a triple unit.

tb496bb
03-18-2010, 06:29 PM
continue to get a egr low flow code on the car. I have removed the egr to making sure it is clean and the plunger moves freely. Checke9p0401)d for clogging and debiris in ports and all appears ok. Is there a way to test the egr valve itself by connecting it to 12 volts on a bench? Which wires at the plug supply currnet to the egr and what activates them? Appreciate any help to test before i go buy a new egr.i have a 99 lumina with 3100 v6. Im hsving the same code with my car . Everything i read say to check the manifold port for blockage. I ran my car with egr removed and found good exhaust flow on one port and good vacuum on the other but im still going to try cleaning out the intake port for egr valve

bsr2002
03-18-2010, 07:55 PM
Continue to get a EGR low flow code on the car. I have removed the EGR to making sure it is clean and the plunger moves freely. Checked for clogging and debiris in ports and all appears OK. Is there a way to test the EGR valve itself by connecting it to 12 volts on a bench? Which wires at the plug supply currnet to the EGR and what activates them? Appreciate any help to test before I go buy a new EGR.

Check this out!

http://www.youtube.com/watch?v=hpB6CELWYhQ

I did this with my 98 Lumina. There was gunk in mine as well. I only wish there were more help vids like this.

kevinb70
03-18-2010, 08:57 PM
egr tube (leading off the exhaust manifold) may be clogged



and i have cleaned that egr passage (like in the video) and yes that thing will clog totally up

Add your comment to this topic!