stereo question

i have a 1993 duster with the stock stereo

can i pop this into it

http://www.amazon.com/Dual-XDM6820-Dash-MP3-Receiver/dp/B0009PKU9C/ref=sr_1_5?ie=UTF8&s=car&qid=1261293123&sr=1-5

or do i need to replace the whole thing (i dont know what its called but the part that the stereo pops onto)

thanks guys

The wiring harness or the hole in the dash? if its the dash then if its a single din this will fit if its a double you will need a spacer there about $15 if its the wiring harness then you will need to cut the old one off and wire in the one that comes with the new deck.

im not sure what any of that is.. but this is what i want to do


i currently have a Alpine CDE- 7828 cd receiver

http://carphotos.cardomain.com/ride_images/1/9/701/20350002_large.jpg

it looks just like that.. (the part that you can pop off and take with you so it dosnt get stolen.)

i want to replace it with a something like this

http://images.kenwood.eu/files/image/1171/8/original/KDC-W3044G.jpg

Notice that it has a aux port for a ipod or mp3 player
that's all i want

but my question is.. does the part that the cd receiver hooks up too
have to be switched out with a compatible one
because one would think that the aux cable plugs into the receiver and goes through it into the stereo behind the receiver.

thanks

if that is your current car, you can should be able to just pop the new one in. You will of course have to replace the mounting cage as well, and use a different harness

If you wanting to just change the part you take with you then, no you cant just change that you have to change the whole cd player.

If you wanting to just change the part you take with you then, no you cant just change that you have to change the whole cd player.

thanks.. thats what i was looking for...

okay so is there a size specification i need to look for or can i just buy one and slap it in..

is this just the face plate with the buttons or is it the actuall CD player.. (the part that the cd actually spins in) along with the detachable faceplate?

im thinking of buying this one

http://www.amazon.com/JVC-KD-R200-Single-DIN-WMA-Compatible-Receiver/dp/tech-data/B001G7EUMU/ref=de_a_smtd

All you need to look for is a cd player that says single din, as for the one you sent a link to yes it is a single din aka slot. And yes it is the whole cd player and faceplate.

alright thanks man

thats all i needed