'67 Dodge Charger

Today I completed the '67 Charger from Revell USA.

I painted it black with Tamiya spraycan and polished it with micromesh polishkit.

I had a big problem fitting the chassis in the body. I used a Dremel to remove some places and now it fits much better.

Also an accident happened :cry: The sidewindow felt exactly between the body and interior, after the chassis was glued on the body. I had to do acrobatic tricks with a tweezer to get that window. When I got it, I had to glue it again but this wasn't easy. I added some bmf again but after all it looks not perfect anymore..... So let it be :)

Here are the final pics:

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_001_%28Medium%29_copy~1.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_002_%28Medium%29_copy~0.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_003_%28Medium%29_copy~0.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_004_%28Medium%29_copy~0.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_007_%28Medium%29_copy~0.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_008_%28Medium%29_copy~0.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_009_%28Medium%29_copy~1.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_011_%28Medium%29_copy~1.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_012_%28Medium%29_copy~1.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_013_%28Medium%29_copy~1.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_014_%28Medium%29_copy~1.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_016_%28Medium%29_copy~1.jpg

http://www.modelbrouwers.nl/albums/coppermine/albums/userpics/10027/af_017_%28Medium%29_copy~0.jpg

I love the overall look of the car very much. Of course some things would have been better, but I was a bit down with this project and wanted to finish it.
The engine, grille and interior are the best parts of it I think. The BMF job was very hard at this body, because of the small trims everywhere.

Here is a short list of accesoires I used:

- Ferrrari Mythos wheels
- PE licenseplate frames
- aluminium exhaustpipes
- interiorjunk
- black and brown interiorflocking
- MR. Model aluminium RPM tacho
- Mr. Detail wired distributor

Hope you guys like it.

Kris.

Very nice! I'm diggin it! Not too pro touring (I mean the wheels).

The car looks sharp! Good job on the paint!

Mark