trouble code P0341
mjtr21
10-08-2009, 09:22 PM
driving to school the other day and the damn light comes on. so i get it checked and they tell me P0341. i said well thats wierd because i had that code a couple of months ago and i replaced the camshaft sensor. now a couple months later it suddenly comes up again.
along with the light i noticed earlier at a stop light i went to take off from a stand still and when i pressed the gas pedal the engine kinda surged before the car took off. so the next traffic light i decided to check that out and from a stand still i gave it almost full throttle and the car stalled.
i already looked at the tips and maintenance section about the sensor and i checked the voltage coming from the PCM and it only read 10.7 volts not the 12 volts. would this be my problem? thanks. any help is appreciated.
oh and the car is a 99 GT with 3.4 engine.
along with the light i noticed earlier at a stop light i went to take off from a stand still and when i pressed the gas pedal the engine kinda surged before the car took off. so the next traffic light i decided to check that out and from a stand still i gave it almost full throttle and the car stalled.
i already looked at the tips and maintenance section about the sensor and i checked the voltage coming from the PCM and it only read 10.7 volts not the 12 volts. would this be my problem? thanks. any help is appreciated.
oh and the car is a 99 GT with 3.4 engine.
xeroinfinity
10-10-2009, 12:27 PM
yes double check the wires.
Sometimes they can get hot from the engine/exhaust manifold and melt.
though the code is for a range performance issue. Could be a PCM issue.
I'd manualy test/check the crank sensors, they could be flaking out and causing cam sensor errors.
Sometimes they can get hot from the engine/exhaust manifold and melt.
though the code is for a range performance issue. Could be a PCM issue.
I'd manualy test/check the crank sensors, they could be flaking out and causing cam sensor errors.
Automotive Network, Inc., Copyright ©2026