97 Ram 4x4 noise when accelerating
TN_DODGE
10-07-2009, 06:58 AM
My 97 Ram 4x4 makes a knocking type of noise near the front/engine area when I first accelerate (actually happens just before I press the accelerator as I remove my foot from the brake).
We're talking <3 mph
It almost sounded as if I was dragging something or something (like a stick) was scraping the bottom.
Any ideas?
We're talking <3 mph
It almost sounded as if I was dragging something or something (like a stick) was scraping the bottom.
Any ideas?
Chris Stewart
10-07-2009, 10:21 AM
Sounds like loose bolts on the torque converter doesn't it?
TN_DODGE
10-07-2009, 11:08 AM
Is that a hard (or expensive) fix?
How worried should I be?
How worried should I be?
Chris Stewart
10-07-2009, 07:04 PM
I reread your 1st post again. It might be the front brakes.
If you don't work on brakes, ask around to friends & kin in your area for a good shop with a free inspection.
If you don't work on brakes, ask around to friends & kin in your area for a good shop with a free inspection.
TN_DODGE
10-26-2009, 11:06 AM
I reread your 1st post again. It might be the front brakes.
If you don't work on brakes, ask around to friends & kin in your area for a good shop with a free inspection.
I hope it is the brakes, but it doesn't sound like the brakes. Sounds like it's coming from underneath.
Also, I crawled under the truck this weeken and saw some grease on the front axle. That might be a grease point and just some excess grease...hope its not a leak.
If you don't work on brakes, ask around to friends & kin in your area for a good shop with a free inspection.
I hope it is the brakes, but it doesn't sound like the brakes. Sounds like it's coming from underneath.
Also, I crawled under the truck this weeken and saw some grease on the front axle. That might be a grease point and just some excess grease...hope its not a leak.
Chris Stewart
10-26-2009, 12:35 PM
I had rust & grease on the drivers side u-joint just outside the front differential tube on my '70 GMC...it was a bad u-joint.
TN_DODGE
10-26-2009, 01:15 PM
I read somewhere that it might be a grease leak at the vacuum switch (little box on axle).
Not sure if it's a big deal or not.
Not sure if it's a big deal or not.
Automotive Network, Inc., Copyright ©2026
