fuel problem
st8pipe350
09-09-2009, 11:43 PM
89 s10 2.5L 5spd.
well as soon as i turn the key to the ON position. gas starts pouring into the tb. replaced the tps and it quit. but now i have no power to my fuel pump.. it primes... but nothing comes out... any ideas?
well as soon as i turn the key to the ON position. gas starts pouring into the tb. replaced the tps and it quit. but now i have no power to my fuel pump.. it primes... but nothing comes out... any ideas?
MT-2500
09-10-2009, 09:53 AM
89 s10 2.5L 5spd.
well as soon as i turn the key to the ON position. gas starts pouring into the tb. replaced the tps and it quit. but now i have no power to my fuel pump.. it primes... but nothing comes out... any ideas?
Does the pump run on start or engine run.
Check fuel pressure with fuel pump running.
Good 12 volts to fuel pump and good ground?
With good power and ground and no fuel pressure chech for out of gas and or fuel filter pluged.
Report back what you find.
well as soon as i turn the key to the ON position. gas starts pouring into the tb. replaced the tps and it quit. but now i have no power to my fuel pump.. it primes... but nothing comes out... any ideas?
Does the pump run on start or engine run.
Check fuel pressure with fuel pump running.
Good 12 volts to fuel pump and good ground?
With good power and ground and no fuel pressure chech for out of gas and or fuel filter pluged.
Report back what you find.
st8pipe350
09-10-2009, 01:47 PM
its got gas, pump doesnt run on start up. runs on the ON position. checking pressure soon. 12v power is good. and ground is good. that was our first thoughts so we ran new wire.will report fuel pressure when i get back. thank you.
st8pipe350
09-10-2009, 07:07 PM
ok, fuel pump is fine. but the injector has NO power to it... fuel was 13psi
MT-2500
09-14-2009, 12:27 PM
ok, fuel pump is fine. but the injector has NO power to it... fuel was 13psi
Check fuse for injector power.
Check fuse for injector power.
Automotive Network, Inc., Copyright ©2025
