Civic 95 % complete

Here some crappy photos of it,

I added a turbo, the full body kit it came with, clear tail lights, and a big exasut,(not in the pics)

i also tried doing the carbon fiber hood, but im not good with graphics

http://files.automotiveforums.com/uploads/932997anotehrcivic.jpg http://files.automotiveforums.com/uploads/808040civic2.jpg http://files.automotiveforums.com/uploads/756630civicdf.jpg

also, this is the Revell civic for thsoe of u that dont know

Cannot really see from the picture quality.
But it looks ok to me.
Nice job, show the other 5% willya? :D

Originally posted by Chain
Cannot really see from the picture quality.
But it looks ok to me.
Nice job, show the other 5% willya? :D

the engine, need an intercooler, and and air filter and soem other things

lookin good but the pix kinda suck

looks good but, taillights look real fogged up and i thinki see some orange peel in the 2nd pic

no orange peel, its weird, first time ever using testors with out having it, and the lights, arwe kinda fogged, when i woke up, they were like that, im not sure what i should do though, any one know what i can do?

http://files.automotiveforums.com/uploads/534554SHITTYCIVIC.jpg
hm... looks like a slight case of orange eel to me, but nothing big

are u talking about where it looks orange? thats my shirrt reflecting off of the car

nothing wrong with the paint on this car!~!

yes! there is! i can see some granular texture in the spot that fullbloodchop circled.

did you paint ti with the wing on or off because my friend is working on this kit and he wasa just wondering....


thanks

-RaceMySS

What'd you use to glue the lights? Superglue?

Lookin good! PRetty clean

Originally posted by daggerlee
What'd you use to glue the lights? Superglue?

Lookin good! PRetty clean


regular testors shit, but when i woke up the next morning, they had mositure in them ;(

Originally posted by RaceMySS_454
did you paint ti with the wing on or off because my friend is working on this kit and he wasa just wondering....


thanks

-RaceMySS

with out it on

hmm....why are all the pics in the shade if your outside i want to see that blue paint .....because it looks black...:o


-RaceMySS

and i also just rubbed my hand over it, and i guess that what u call ornage peel? ok? what ever? if some thing like that bother you on your models, then u must be a true perfectionist

Originally posted by RaceMySS_454
hmm....why are all the pics in the shade if your outside i want to see that blue paint .....because it looks black...:o


-RaceMySS

the paint is purple, looks black in most pics, in teh sun it looks way too shiny, most detail cannot be seen

It looks like you have som orange peel at the side skirts too and the back seems to be lower then the front.

Originally posted by njh
It looks like you have som orange peel at the side skirts too and the back seems to be lower then the front.

if u say so about the sides, on the front: the table leans to one side, also, thats the way the kaminari kit looks, the frint kinda looks up, in a weir dway

Looking pretty sweet

Orginally posted by supratuner
if u say so about the sides, on the front: the table leans to one side, also, thats the way the kaminari kit looks, the frint kinda looks up, in a weir dway

What I'm refering to are the areaas circled in red.
http://files.automotiveforums.com/uploads/300338932997anotehrcivic.jpg
http://files.automotiveforums.com/uploads/843552808040civic2.jpg

nothing there, dead serious. on the otehr side, there is a little bit after lots of inspection

:) Lookin' good supratuner,try and get some better pics,they dont do it justice:) Show us the moter when shes done.:ylsuper

Not bad...I will refarin from critique...after all, the Silvia is your next project I belive ;)

loking good!:D

im working on this kit too!

This turbo you speak of, is it complete with wastegate and intercooler piping? Does it have 3 pipes in the exaust manifold or 4 like it's suposed to? I remember you took the turbo off a 300zx and put it on an integra and sait was turbo, even though there was only 3 pipes for the exaust manifiold, did you do the same with this? show pics

ya i also think you should show some pics of the engine it sound sick

Little suggestion: Take pics from farther away. Seems your camera can't focus in that close. You won't get as much detail in pics, but we'll get a better overall idea. ;)

Originally posted by integra818
This turbo you speak of, is it complete with wastegate and intercooler piping? Does it have 3 pipes in the exaust manifold or 4 like it's suposed to? I remember you took the turbo off a 300zx and put it on an integra and sait was turbo, even though there was only 3 pipes for the exaust manifiold, did you do the same with this? show pics

HAHAHAHHAHAH

No, hes gonna run an AEM Header :rolleyes:

damn, sorry to say, but that car is riced out!hahah:p

Originally posted by Shorty4859
damn, sorry to say, but that car is riced out!hahah:p

WTF? yes it is, but yours usually are too

to who ever asked about the engine: i did have all the intercooler pipings, wastegate, blow off vavle, but i had to them all off to fit in the engine, will be working on puting them back in to fit in there, the engine speace is more crowded than the ITR kit, also, yes, i only have 3 things from the manifold to the turbo, i would have amde a fourth, but i dont have any thing that small.

Not bad at all joey. Still some room for improvement with your modeling skills though, same goes for your photography too;) My advice is to continue making models like this and stop slapping on half a tube of putty on them until u have the basics spot on.