How to replace the multifunction turn signal

First undo the trim around the steering wheel. You need a 25 torx and another driver for the other torx screw. Also nee to remove lower panels and instrument cluster cover. Plus you will need zip ties to replace the ones you need to cut.

New(junk yard) and old one

http://img.photobucket.com/albums/v448/therealsundance/DSC00205-1.jpg

Unscrew the harness. The plugs to the MFS push out the bottom, so you have to unscrew this.
http://img.photobucket.com/albums/v448/therealsundance/DSC00206-1.jpg

Torx screws that hold in place
http://img.photobucket.com/albums/v448/therealsundance/DSC00207.jpg

Just turn the steering wheel to get to the bottom one
http://img.photobucket.com/albums/v448/therealsundance/DSC00208.jpg

Other plugs on steering column that need to be changed
http://img.photobucket.com/albums/v448/therealsundance/DSC00209.jpg
http://img.photobucket.com/albums/v448/therealsundance/DSC00210.jpg


Opps
http://img.photobucket.com/albums/v448/therealsundance/DSC00211.jpg



I replaced it because the blinker relay was clicking all the time.