2004 x-5

Does anyone know how to replace the brake switch on a 2004 x-5? I checked the bulbs and fuses and all were in tact. The only thing I could think of as to why the brake lights weren't working was the brake switch. Thanks

did you test the contacts on the brake light assembly itself? sometimes i found that a little corrosion will make all lights fail. if not
Replacing Brake Light Switch

Necessary preliminary tasks:



Remove trim panel for pedal assembly.

E38 up to 09/98:

http://alldatapro.com/alldata/PRO%7EV140698200%7EC38332%7ER0%7EOB0%7EP3R0H%7EN/0/101825161/103141007/103141053/103141055/34853741/34867926/34868156/34850045/110909261/110909262

Disconnect plug connection.

http://alldatapro.com/alldata/PRO%7EV140698200%7EC38332%7ER0%7EOB0%7EP3R0H%7EN/0/101825161/103141007/103141053/103141055/34853741/34867926/34868156/34850045/110909261/110909263

Depress brake pedal as far as possible, using pedal support if necessary.

http://alldatapro.com/alldata/PRO%7EV140698200%7EC38332%7ER0%7EOB0%7EP3R0H%7EN/0/101825161/103141007/103141053/103141055/34853741/34867926/34868156/34850045/110909261/110909264




Pull tappet and sleeve forward completely.
Press together clips and pull back switch.

Installation:
Slowly bring brake pedal into initial position.

E38 from 09/98, E39, E52 and E53:

Installation:
On E38 Series RHD cars with ACC from 04/2000 and on all cars with DSC:
A gap of 0.7 mm must be adjusted between brake pedal and brake light switch.
If this gap fails to guarantee problem-free operation, the gap must be reduced to 0.6 mm .

Unfasten plug connection (1) and disconnect.
Pull brake light switch (2) in direction of arrow out of brake light switch holder (4).

Installation:



Press brake pedal (3) to floor.
Slide brake light switch (2) as far as it will go into brake light switch holder (4).

http://alldatapro.com/alldata/PRO%7EV140698200%7EC38332%7ER0%7EOB0%7EP3R0H%7EN/0/101825161/103141007/103141053/103141055/34853741/34867926/34868156/34850045/110909261/110909265




Grip brake light switch holder (4), slowly return brake pedal (3) to starting position and pull back to stop.

NOTE:
Removing brake light switch holder (4):
Press brake pedal (3).
Press catches together and unclip brake light switch holder from brake pedal (3).





http://alldatapro.com/images/blnk_spc.gif © 2009 ALLDATA LLC. All rights reserved. Terms of Use (http://alldatapro.com/alldata/PRO%7EV140698200%7EC38332%7ER0%7EOD%7EN/0/101825161/103141007/103141053/103141055/34853741/34867926/34868156/34850045#foot)