removing bezel?

Lol hello everyone.

I have the noobiest question ever. I have an old 96 Toyota corolla and I cannot find any help on removing the bezel to be able to remove the deck installed. I finally found 2 clips at the very top right of the bezel, but it doesn't seem to pop off using a flat screwdriver (not prying too hard as I dont want to break the flimsy plastic :P) Does anyone know how to get the bezel off here to remove the deck installed?

Here is pic I found of what the TOP PART of the bezel looks like:
http://memimage.cardomain.com/ride_images/1/3349/2021/8371010007_large.jpg

Thank you very much,
-ello

check underneath, mine has two screws under the bottom. Also pull the clock out, there is often one under that.

check underneath, mine has two screws under the bottom. Also pull the clock out, there is often one under that.

I took out the two screws and still cant get that piece to budge. How did you remove the clock without removing this plastic piece?

mine just pops out with a little pressure, but it's a honda - maybe it's different.

Perhaps you should ask this in the Toyota section, they would be a little more familiar with them than I would.

mine just pops out with a little pressure, but it's a honda - maybe it's different.

Perhaps you should ask this in the Toyota section, they would be a little more familiar with them than I would.

what part do you apply the pressure to, to get it to start to pop off.

I'm moving this to the Toyota forum for additional responses.

my panel is angled and so the bottom of the clock has a flat spot that I can press against to pull it out. Try gently prying it out with a flat tip screwdriver.