2000 GTP alignment specs

Does anyone have the front and rear alignment specs (camber, caster, toe, etc...) that you can post for a 2000 GTP? Are these the same or different than for either the SE or GT models?

Also, which of the specs are adjustable on the 2000 GTP? (I was told that there is no adjustment for my car for caster.)

Thanks in advance!

The alignment specs are the same regardless of model.

Document ID# 580733: Wheel Alignment Specifications

Operation Service Allowable Service Preferred
------------------------------------------------------------
Front Suspension
Camber (Cross) -1.40 to -0.40 -0.90
Caster (Cross) 2.50 to 3.50 3.00
Steering Angle -3.50 to 3.50 0
Toe (Total) 0.30 to -0.10 0.10

Rear Suspension
Camber (Cross) -1.40 to -0.40 -0.90
Thrust Angle -0.15 to 0.15 0
Toe (Total) -0.40 to 0.20 0


The GM manual describes adjustment procedures for front/rear toe and camber. There is no procedure for caster since it is not adjustable on these GP cars....unless you bent something and need the frame straightened/replaced.

HTH
Addam

Also, no adjustment for camber unless you add a camber kit.