05 Dakota brakes

I am getting ready to do brakes on a 2005 Dodge Dakota with 4 wheel disc and I would like to know if there are any special tools needed to do the job. If I remember correctly on my Dodge Intrepid I needed a torx bit to remove the calipers, but I am not sure of the size. A little help please!

c'mon no responses? Somebody must know something!

I'm not sure but this set is cheap and I'm sure has what you need.
http://www.autopart.com/tools/toolsmain/tool/T_1485.htm

thanks, I did the brakes today, turns out I only needed a 12mm socket and a 10mm socket for the rears. Thanks again.