Air Compressor - Auto Load Leveling
1999montana
05-24-2009, 08:18 PM
1999 Montana EWB with load leveling and accessory air inflator.
Does anyone know what that 11/32 rubber hose running from the air compressor's electric motor does? The hose is similar to windshield washer pump hose.
It's connected to a fitting on the motor and runs to a fitting on the inside of the left frame rail.
It has a T connector and a second hose about 6 inches long that doesn't appear to go anywhere and may have had a fitting in it at one time. (Fell out?)
It looks like the hose might be a vent for the electric motor. The line is not high pressure, but there is a bit of air that comes out when the compressor is running.
Of course the rubber hose under the van is rotting away.
Does anyone know what that 11/32 rubber hose running from the air compressor's electric motor does? The hose is similar to windshield washer pump hose.
It's connected to a fitting on the motor and runs to a fitting on the inside of the left frame rail.
It has a T connector and a second hose about 6 inches long that doesn't appear to go anywhere and may have had a fitting in it at one time. (Fell out?)
It looks like the hose might be a vent for the electric motor. The line is not high pressure, but there is a bit of air that comes out when the compressor is running.
Of course the rubber hose under the van is rotting away.
rkvons
05-26-2009, 11:59 AM
I'm just guessing here, but it's probably to let water out that forms due to compressing humid air.
Automotive Network, Inc., Copyright ©2025