How to program 97 Aurora keyless entry?

Hello, I have purchased two new key fobs for my 97 Aurora and I'm wondering if I can program them myself? If anyone can help I would really appreciate it.

Thanks!

To resync the transmitters stand within 10 feet of the car and hold the LOCK AND UNLOCK buttons together for 10 seconds. This should recode the transmitters with the sysytem.

what happens then

Here's an excerpt from the manual:

Resynchronization
If only the instant alarm button works, the transmitter
needs to be resynchronized to the receiver. Do this by
pressing and holding both the LOCK and UNLOCK
buttons on the transmitter for about eight seconds. You
must be within range of the vehicle.
Once the transmitter has been resynchronized, the horn
will chirp and the exterior lamps will flash once. The
system should now operate properly.

what manual are you talking about?

The 1997 Oldsmobile Aurora Owner's Manual.

do you know anymore about programing the keyless entry cause I bought a new one and I need it programed and I dont feel like spending $34 at the dealer just to program it.

The manual just tells you how to resynchronize transmitters that have already been encoded to respond to your vehicle. In order to encode a new transmitter the chip needs to be flashed. I'm not sure how to do this outside of a dealership.