Our Community is over 1 Million Strong. Join Us.

Stop Feeding Overpriced Junk to Your Dogs!

GET HEALTHY AFFORDABLE DOG FOOD
DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.
CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.
NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME
PROPER NUTRITION FOR ALL BREEDS & AGES
TRY GRAND FUTURE AIR DRIED BEEF DOG FOOD

Balancer and flywheel question


Stroker_347
05-09-2009, 07:56 PM
Hey i am working on finishing assemblying my new 347 and i came to the point where i needed to put the balancer and flywheel on and i didnt know what to use. Its been balanced to 28oz and i was hoping i could use a balancer and flywheel off a 351W because they are balanced to 28oz also. So my question is will the balancer and flywheel off a 351W work on a 347 balanced to 28oz. Also the balancer fits on perfect and the flywheel will bolt on to the crank and torque converter. Thanks
SkylineUSA
05-10-2009, 01:12 AM
Hey i am working on finishing assemblying my new 347 and i came to the point where i needed to put the balancer and flywheel on and i didnt know what to use. Its been balanced to 28oz and i was hoping i could use a balancer and flywheel off a 351W because they are balanced to 28oz also. So my question is will the balancer and flywheel off a 351W work on a 347 balanced to 28oz. Also the balancer fits on perfect and the flywheel will bolt on to the crank and torque converter. Thanks

If they are both 28s, then YES:smile:
Stroker_347
05-10-2009, 04:15 AM
Awsome thanks, i just asked because i thought mabe the weight was on a different side of the balancer and i dont want to end up busting all my bearings on startup. Just hope it works :ylsuper:

Add your comment to this topic!