Looking for and edelbrock vortec intake & beehive valvesprings
inglewatt102
05-03-2009, 07:44 PM
I really need some beehive valvesprings & an edelbrock rpm or rpm airgap intake for vortec heads.Let me know how much including shipping.Thanx guys
MrPbody
05-11-2009, 12:51 PM
iw,
Looks like this one is "sitting here", so I'll throw something in...
Part number for the intake is Edelbrock #7516.
The valve springs will come from Comp, but you're going to need to know installed height and cam type.
I figure you're probably looking for "used" parts if asking here. Unfortunately, the parts you're asking about aren't old enough to be available "used", at least on ay regularity. I would NEVER buy valve springs used, unless you KNOW the source. The intake is a different matter. As long as the bolt holes are okay and it hasn't been extensively modified, it should be fine.
Figure on spending about $400 for the intake, springs and related hardware.
Jim
Looks like this one is "sitting here", so I'll throw something in...
Part number for the intake is Edelbrock #7516.
The valve springs will come from Comp, but you're going to need to know installed height and cam type.
I figure you're probably looking for "used" parts if asking here. Unfortunately, the parts you're asking about aren't old enough to be available "used", at least on ay regularity. I would NEVER buy valve springs used, unless you KNOW the source. The intake is a different matter. As long as the bolt holes are okay and it hasn't been extensively modified, it should be fine.
Figure on spending about $400 for the intake, springs and related hardware.
Jim
Automotive Network, Inc., Copyright ©2025