Power windows/locks wiring

Ok so I finally got around to installed the power windows and locks that have been sitting in my kitchen for months now. Me and my buddy worked on them for a good 5 hours yesterday. The first door was a huge pain in the ass to try to figure out how everything comes apart (I failed at my first solo attempt) and how to squeeze everything out of there. And then how to get everything back in.

Drivers door was done in about 15 minutes lol.

So I've got the motors and locks in. We're able to get the windows up and down by wiring up a 12v source to each side. That works fine. Haven't tried using the driverside to lower to passengerside yet.

Tried with locks and got nothing out of them on neither side. Don't know what's going on there.

Does anyone have any really good wiring diagrams for these things? I downloaded 95-96 electrical system which does have some good info, but feels like it's missing something. It was dark in the garage and raining all day so it was kind of tiring, but we'll try again sometime this week. In the mean time, driving with no panels or front speakers :(

I did this on my base s10 and the wiring easy, to do the locks, you need relays and i believe you alreade have the actuators, I wire the actuator so that they both rest at ground and when you apply a - pulse one side of the motor will be positive and the other negative. i have the wiring in my computer but im sure you can find it on google.

The relays i like to use are DEI 451M, you need just one because they actually a relay pack, I have a few here because ive been installing alarms and starters. if you need just one let me know. i'll let it go cheap

I did this on my base s10 and the wiring easy, to do the locks, you need relays and i believe you alreade have the actuators, I wire the actuator so that they both rest at ground and when you apply a - pulse one side of the motor will be positive and the other negative. i have the wiring in my computer but im sure you can find it on google.

The relays i like to use are DEI 451M, you need just one because they actually a relay pack, I have a few here because ive been installing alarms and starters. if you need just one let me know. i'll let it go cheap

I have 3 relays that were part of the power windows/locks (I think). I'm not that great with wiring at all. I really need to go out there and figure it out. Do you have diagrams at all?

yes, i have them but i will give you the link and you can download them yourself.

http://www.commandocaralarms.com/downloads/doorlockactuators.pdf

there you go, if you need it explained let me know. Also, right now would be a good time to do an alarm to go with your locks.

I got the power windows all wired up and working and decided to call it a day. Turned out pretty good so far and working pretty decently. Will try locks at a later time. Just don't have time right now to find all the wires and everything.