Stalling Problem
ranclark
04-04-2009, 04:55 PM
Last week my 95 Wrangler 2.5 died. At first I thought fuel pump. I removed the pump and found that the wires for the pump had been pinched and were corroded and one had broken. I spliced the wires with a new section, soldered and shrink tubed them. Jeep ran fine for 2 days and then quit again. This time after a few minutes, fired up again. Did this a few times so I replaced the fuel pump, fuel filter and the pump relay. Started right up and idles forever but will sometimes just quit while driving. After a few minutes and tries cranking, it will start right up. Checked wires and connections and can't find anything out of place.
Any help out there?
Any help out there?
hoopdaddy6
04-06-2009, 03:51 PM
you might look at the idol air control motor. just had to replace mine in the xj. i was having similar problems.
Automotive Network, Inc., Copyright ©2025