Escort Muffler

Hi

I have a 96 LX

I'm wondering what's the size of the pipe that the muffler is attached to. I'm thinking about installing a performance muffler.

Thanks Chris

I can't remember but the parts place should know. There are also many size adapters you can use.

Well the most popular size's are 2-2.5inch..but not sure if that applies to the escorts.

If you are sure you want to do it then hacksaw the old muffler off and measure it.

If you are sure you want to do it then hacksaw the old muffler off and measure it.

If i hacksaw the old muffler off, then what I’m i going to use to replace it untill i get the new muffler? lol..i'll measure the pipe side ways and see if it hits the popular sizes above.
Is it easy to replace a muffler without using a blow torch.

What would I need to prepare for this project?



THanks guys

All I used was a hack saw. If you are headed to the parts place to get the new muffler then cut the old one off. You can make the one trip without a muffler. You might also check mufflers at autozone com for your car and see if they list the measurment.

All I used was a hack saw. If you are headed to the parts place to get the new muffler then cut the old one off. You can make the one trip without a muffler. You might also check mufflers at autozone com for your car and see if they list the measurment.


haha thats one way to do it..i checked autozone and there spitting out 2"inlets so i'm guessing thats the size

thanks