1/12th Tamiya Renault RE 20 WIP

Hey everyone, although I have the Pocher F40 WIP going, I joined the '09 Group Build on another forum and the subject I chose was the RE 20. This will be a full-on build, not a throw it together job, so I thought I should devote a WIP thread to it, separate from the F40 WIP. No sense in hijacking my own WIP, right? Anyway, it's early-on in the build and I am still aquiring all of the necessary bits and pieces, but I did post a couple of pics on the F40 WIP, but I'll duplicate them here, so this WIP is a complete work. For all who didn't see them, here are the wheels I turned up. The fronts need milled and smoothed and polished, the rears are still slugs and only rough turned so far. There are a couple of pics of the first rear I turned, but it is dimesionally incorrect, so it's junk. I showed it next to the kit wheel for comparison and with the kit center pressed in for effect.

http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2091.jpg

http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2084.jpg

http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2083.jpg

http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2085.jpg

http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2088.jpg

http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2089.jpg

That's all for now, thanks for looking!:):):)

BM1

This is the kind of stuff that keeps me coming back here. Look at that machining. I love it! Now if you could show a step by step with those babies chucked up in the lathe, I'd be really happy!

Great start.......I'll be watching for sure.

Clay

This is the kind of stuff that keeps me coming back here. Look at that machining. I love it! Now if you could show a step by step with those babies chucked up in the lathe, I'd be really happy!

Great start.......I'll be watching for sure.

Clay

Thanks Clay, I have not done any finish machining on the rears yet, so I'll take a bunch of "in progress" pictures of them as I turn the deep dish and the final steps in the rim face and post them this weekend. BTW, your builds are awesome, as well! Awesome paint on the T/F build and the NASCAR build detail is insane!:) This is a great forum because of all of the talent and comradarie that exists here... no ego, just great building, sharing and complimenting!:2cents:

BM1

Okay, got the wheels pretty much done on the lathe, still have to mill the bead locks, air valves and bolt holes and then they're done! Clay had asked for some shots of the wheels chucked in the lathe, so here ya go...

Here I am boring the deep dish diameter to the back of the rim half...
http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2092.jpg

Now I am setting up and turning the angle of the steps in the rim face to match the fronts...
http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2093.jpg

http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2095.jpg

Here I am breaking bits and ruining hours of work in a millisecond:banghead::banghead::banghead:... ouch!!!
http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2096.jpg

http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2098.jpg

And here are some shots of the 2 fronts and 1 remaining rear... I'll have to make another rear this week... yuk!!!
http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2099.jpg

http://i713.photobucket.com/albums/ww136/bmwmech1/Renault%20RE20%20WIP/100_2101.jpg

Thanks for looking/laughing at my mistake...lol :):):)

BM1

Hey everybody, sorry no posts, but as most have read, I got crunched a week ago and have not felt much like building. I am back in the workshop tonight, though, so I thought I'd post a few pics of my dead BMW. Although I feel fine now, the car is a total loss, so I have been scrambling to secure a replacement. Nothing yet, but my expectations are high. :) All of the photos are after I had pulled everything of value off of the car, like the wheels and tires and the sport springs, etc. I believe it is going to the salvage yard tomorrow, so I will say farewell :( ...

http://i713.photobucket.com/albums/ww136/bmwmech1/Crashed%20E30/100_2102.jpg

http://i713.photobucket.com/albums/ww136/bmwmech1/Crashed%20E30/100_2103.jpg

Even buckled the roof...
http://i713.photobucket.com/albums/ww136/bmwmech1/Crashed%20E30/100_2107.jpg

...and cracked the oil pan... the black trail of death...
http://i713.photobucket.com/albums/ww136/bmwmech1/Crashed%20E30/100_2110.jpg

Thankfully neither myself, nor the woman who turned left in front of me, was injured. Her 05 Ford Escape was also totaled. Great way to start the week...

BM1

At least you're all right, that's all that matters. Now get building...

ouch!! looked like a nice beemer. at least your doing good.

those rims are nice looking, wish i could have a lathe and a mill. would be fun to make all kinds of parts. maybe later.

take care bro, hope you feel better to do some more great work.