HELP!!! driverside halfshaft problem!!

hey guys i need help installing the driverside halfshaft on my 94 3kt sl. i already installed it and a few days later...it falls out!! it fell out of the tranny side not the wheel side. i thought that i had got the splines lined up correctly and i even hammered it in. I greased where the halfshaft connects to the trasfer shaft, which goes to the tranny. i dont no what to do or how else i should put it in, is there a special clip somewhere im not aware of and if so how do i no its in all the way, please help quick i need answers thanks so much

Did you bolt the stay bracket on the intermediate shaft back to the block?

There is no c clip that holds the intermediate into the trans. Its held in strictly by the stay bracket being bolted to the block.

the intermediat shaft is fine, its the outer shaft, the on that i changed out thats falling out of the intermediate shaft.
SAMSUNG-SGH-I617/1.0 Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 7.6) UP.Link/6.3.1.17.0

Ahhh, I misread.

You didnt get it seated. Pull the intermediate shaft out and seat it that way.

yea good idea, ill do that in the morning and update, should be good that way tho
SAMSUNG-SGH-I617/1.0 Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 7.6) UP.Link/6.3.1.17.0