Routine Maintenance for 140K Miles on a TC!

1) Pull Motor:sunglasse
2) New Valve stem seals & valve cover gaskets.
3) New Coolant Heater tube going into the middle of Intake.
4) New Intake Gasket.
5) New Freeze plugs,befor the one behind Engine go's Bad.
6) New Water pump,thermostat + hoses.
7) New plugs + wires,if didn't replace already.
8) Put Motor back in.

* Old/Bad - Anti freeze protection will cause COOLANT parts togo bad!:banghead:

MCGIVER

As long as you have the motor out, it would be a good idea to replace the trans pump seal and the engine oil pan gasket.