2001 Lesabre Rack-and-Pinion question

Replaced some front-end components at 112K. Struts, left and right tie-rod ends, rear shocks. CV-shaft on one side.

I took notice of a clunking sound when stopped/in-gear and rocking the steering wheel back and forth. I'm wondering if this sounds like one of the following:

1. Rack-and-pinion mounting bushings
2. Rack-and-pinion unit
3. Inner tie rods
4. Other suggestions ?

Thanks

I had the same problem with my Lucerne (replaced the LeSabre) and it was Item #2. The dealer first replaced the intermediate steering shaft, and then determined it was the rack & pinion unit. Mine was noisy when stopped either in gear or not. Anyway that fixed it in my case..

I had the same problem with my Lucerne (replaced the LeSabre) and it was Item #2. The dealer first replaced the intermediate steering shaft, and then determined it was the rack & pinion unit. Mine was noisy when stopped either in gear or not. Anyway that fixed it in my case..How much did it cost to fix?
Chris.

How much did it cost to fix?
Chris.

Not a clue, Chris. The car is still under warranty thank the gods. Today it goes in for two new struts (warranty again) Stay away from Lucernes, boys and girls.