Our Community is over 1 Million Strong. Join Us.

Stop Feeding Overpriced Junk to Your Dogs!

GET HEALTHY AFFORDABLE DOG FOOD
DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.
CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.
NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME
PROPER NUTRITION FOR ALL BREEDS & AGES
TRY GRAND FUTURE AIR DRIED BEEF DOG FOOD

Amp shutting off need help.


nlghtcrawler
03-08-2009, 04:05 AM
I recently got this:
Two 12" Kicker Comps ( http://www.kicker.com/comp )
powering it is a Kenwood-KAC-8103D ( http://www.crutchfield.com/p_613KAC8103/Kenwood-KAC-8103D-Factory-refurbished.html?search=Kenwood+KAC8103D&tp=115 )
What happens is (just recently started) I can listen to music at very low volume, and when i turn it up the light on the amp turns off completely, and the amp is completely shutoff and if i turn the volume back down the light on the amp comes back on but only about half bright, when i turn it down almost all the way it will 'catch' and the light will be at full brightness.

I was thinking could this be a Ohms problem or a grounding problem? (I have it grounded to the underside of the trunk)

Anyone have any ideas?

PaulD
03-08-2009, 10:02 AM
do you have a voltmeter ? If so, try taking some readings at the amp when your buddy is turning it up

nlghtcrawler
03-09-2009, 08:14 PM
I tested it with a volt meter and when the amp was on and running fine (very low volume) it was at 13.5 volts (at the amp connections)

When I turned the volume up however, the volts went to 3v down to 1.5v

I think i may have fixed it though, the wire running from my batter to my amp has a fuse box type thing in it. Well i noticed that the wire that connected to the fuse box (from the battery) was a very skimpy. I changed it out with a thicker wire & I made the connection the best it could be.

It seems to be running fine, I guess that was the issue.

PaulD
03-09-2009, 09:04 PM
that was almost assuredly it ... it doesn't take much of a resistance drop to kill the voltage when you start pulling a lot of power.

nlghtcrawler
03-09-2009, 10:13 PM
yup thanks for the quick replys

Add your comment to this topic!