Calling All 4th Gen Hatchs!

I will have pictures of mine up tomorrow, post yours.

http://img9.imageshack.us/img9/4594/001aa3.jpg

http://img9.imageshack.us/img9/4421/002ls1.jpg

http://img518.imageshack.us/img518/8186/003um5.jpg

http://img403.imageshack.us/img403/3838/004tl3.jpg

http://img14.imageshack.us/img14/1424/005mr5.jpg

That is a sweet exhaust setup.

That is a sweet exhaust setup.

Hahahaha..........The bolt that was holding my muffler up, fell out, because the guy that installed it, never tightened it the whole way. And its fully welded.

Hahahaha..........The bolt that was holding my muffler up, fell out, because the guy that installed it, never tightened it the whole way. And its fully welded.


Looks a little saggy. Are those factory service manuals for the ED?

Like I said the muffler bolt fell out. But its back up now.

And the guy I bought the car off said, it was the service manuals for the car, not sure if its just for the 1989 Hatch or the 88 - 91 Civics, I have never looked at them since I bought it. One is for working on the car, one is for the wiring.

Mines held on with zip ties.. :P But thats because there is no rubber hanger made that is short enough to clear my sway bar. The hangers touch to do it.

Mines held on with zip ties.. :P But thats because there is no rubber hanger made that is short enough to clear my sway bar. The hangers touch to do it.

post pictures, this is a thread for posting pictures.

Got some rims and did the CRX dash swap.

http://img21.imageshack.us/img21/6917/dsc06138te7.jpg

http://img19.imageshack.us/img19/349/dsc06132au8.jpg

http://img18.imageshack.us/img18/2521/dsc06135zd9.jpg

Dash looks great... eventually, I might have the upper piece to fix that mark, if you care by then... I have to finish gutting the other CRX soon, so I'll see if that one is good or not.

Like I said, get that damn fender fixed... at least take it off and straighten it.

Like I said, get that damn fender fixed... at least take it off and straighten it.

Give me time, Im putting on the exhaust I got from you tomorrow. So I will work on the fender then.

All right everyone, here are some more pictures of what I did to the "beast" LOL!!!

Got a short shifter, steering wheel, rear tinted windows, CRX Pan seat swap and a cold air intake (didn't install the tube just the filter). I haven't started the passenger side yet. Im also painting the 2 rims that I have off the car at the moment. I sanded them and painted them flat black. :D

O, I also got a black primered passenger fender, got to put that on later this week.

http://img19.imageshack.us/img19/1629/dsc06155s.jpg
http://img17.imageshack.us/img17/3496/dsc06158l.jpg
http://img7.imageshack.us/img7/5977/dsc06156k.jpg
http://img106.imageshack.us/img106/7613/dsc06157.jpg

I swear the interior of your car looks more and more like mine every day... LOL.

Get that fender mounted, and I'll see about getting you some OEM color paint if you want...

The only real reason Im replacing the fender is cuz you keep nagging me about it. LOL, I could really care less. But thats just me.........and my lazyness.

The new word from the world to my wife - apparently, this family we know is going to have one extra car... a '02 Taurus... And supposedly, they're thinking about giving it to my wife for her "baby shower" present.

I guess you can't get a better deal than that, unless of course it doesn't work out.

I pulled the carpet out of my car today, and started to dye it (after I cleaned the hell out of it)

Here are some pictures after I used 3 boxes of dye. Right now its more of a Navy Blue then black. But I have more boxes of dye that Im going to use tomorrow, to finish it up. Also the shinny stuff on the carpet is water when I took these pictures it was still drying.

http://img12.imageshack.us/img12/8227/dsc06167d.jpg

http://img12.imageshack.us/img12/6687/dsc06168.jpg

http://img12.imageshack.us/img12/497/dsc06169j.jpg

After seeing a picture of someone cutting holes in their dash trim for gauges. I loved it, and decided to do it. But being short on time and money I never got around to doing it.

But today I had some free time, and an Oil Gauge.

http://img264.imageshack.us/img264/4669/dsc06177u.jpg

http://img14.imageshack.us/img14/174/dsc06176.jpg

I will cut out the 3rd hole later. Right now Im just sticking with the 2.