Our Community is 940,000 Strong. Join Us.


93 S-10 Blazer- engine temperature gauge


ksue
02-08-2009, 06:38 PM
The gauge is not registering anything at all. I will not be able to tell if the motor is running hot, or overheating. How can I fix this?:banghead:

duke350
02-08-2009, 07:26 PM
On the side of the block on the passenger side there will be the temp guage sending unit.
There is another temp sending unit towards the front under the 'snorkel'. This is the one most parts stores carry. The plugs on them are different, but they will screw in either place. Make sure you get the right one. I know NAPA carries both.

ksue
02-08-2009, 09:32 PM
On the side of the block on the passenger side there will be the temp guage sending unit.
There is another temp sending unit towards the front under the 'snorkel'. This is the one most parts stores carry. The plugs on them are different, but they will screw in either place. Make sure you get the right one. I know NAPA carries both.

Thank you so much. I'll try that :grinno:

duke350
02-08-2009, 09:40 PM
I think these are the 2 diff plug types.
http://partimages2.genpt.com/partimages/647257.jpg
http://partimages2.genpt.com/partimages/501988.jpg
So, like I said, make sure you get the right one. Also, when you pull it out, it will leak coolant, unless you drain it first. Make sure engine isn't to warm.

ksue
02-11-2009, 07:54 PM
I think these are the 2 diff plug types.
http://partimages2.genpt.com/partimages/647257.jpg
http://partimages2.genpt.com/partimages/501988.jpg
So, like I said, make sure you get the right one. Also, when you pull it out, it will leak coolant, unless you drain it first. Make sure engine isn't to warm.

I'm going to take these pictures with me to NAPA tomorrow. Thank you so much for your insight.

:smokin:

Add your comment to this topic!