Would These Fit...

would these fit easily on my Civic or will body work be needed??

http://files.automotiveforums.com/uploads/383021i-3.jpg

Is your Civic a 6th generation? If your Civic is a 4th generation your are without a doubt going to be doing custom body work.

how the fuck do i know if its a 4th or 6th generation what teh hell is these geneartions lol

Generations is the year your car was made. (i.e. 4th generation civic is 88-91) then when the body style changes it is another generation.

you have a 4th gen 88-91 crx/civic
and 6th gen is 96-98 or 00 not sure

yes i have a 4th gen so will it need major body work to fit these or not to bad????? and will it cost $$$$$$$????

Seeing that those lights are way bigger than ours (4th gen) yes you will need some body work.

dude there not that much bigger is it major body work or what look at back of my civic the light are big?

http://files.automotiveforums.com/uploads/801242back.JPG

They are not extremely bigger but they are bigger. Then they look like they are not the same length as ours. I was looking into that look because I wanted mine to be red and white. This guy right here used the aftermarket clear ones for our car and painted them. So thats the route that I am leaning toward.
http://files.automotiveforums.com/uploads/152339Civictailights.jpg

No bodywork needed

how much they cost?

yes it will be a lot of body work, and it will be expensive! (no less than a grand)

I stay around the corner from Nopi and they told me $177 for the clear ones. From there I am going to get them painted, if I cant paint them myself. Oh and I am a chick not a dude ;)

have msn?

you can get a set of used clears for about 100 bucks, new will run about 160-200 dollars, and just use TESTORS RED TRANSPARENT PAINT. You can buy this at a hobby store, or even Wal-Mart (in the toy/model car section).

yeah, I neve really used it though, I think it is tesham or [email protected]

An easy wayto tell if these kinda of things will fit go look at yours. In this case go look at your taillights. Do the ones in the pic look remotely close? No, they don't. So common sense says it won't fit. You have just arrived at your answer. Go take a break, drink something and enjoy yourself.

jmunk are u dumb? he asked what it would take to modify!! i think he realises the wont fit. YOUR JUST A LITTLE LATE!!

- no less than $1000 if you get some people to do it, but if you know how to work with fiber glass, sanding, making brackets, bondo, ( really not that hard, mostly common sense and direction following ) you can do it yourself really cheap. Just make sure you know exactly what youre doing. I think the biggest thing to do in THIS particular project, is get the correct height and depth dimensions of new tail lights.. make some custom brackets, because the back of the 2 dif. tail lights most likely have dif. bolting positions, and drill, position, fiber glass in.
= heres some of my bracket pix of my prelude project currently in progress - ( not great pix , dont roast on me :( )

:rolleyes: images are too large.. so just chek it out here :bloated:

prelude brackets for fittin em in my 4d 91 (http://www.project-4g4d-civic.vze.com)
just go to the PROJECTS page, and SIGN guest book if you like or have comments :D

Originally posted by 1990civic
you can get a set of used clears for about 100 bucks, new will run about 160-200 dollars, and just use TESTORS RED TRANSPARENT PAINT. You can buy this at a hobby store, or even Wal-Mart (in the toy/model car section).

I did my stock taillights with that stuff and it turned out great!
http://www.imagestation.com/picture/sraid56/p86246ad85df2a13e50a10d6db30f3b6e/fc76d8b2.jpg

does anyone have any pics of the JDM headlights for a sedan, thanks in advance.

Originally posted by Stali08
does anyone have any pics of the JDM headlights for a sedan, thanks in advance.

http://www.imagestation.com/picture/sraid22/pa9fd5c46aa77f671973c4c221675be85/fdacc660.jpg

http://www.imagestation.com/picture/sraid22/p4a69fde88c7a1d6db5111a51147d7347/fdacc651.jpg

perdy clean headlights - ~!

i'm doing alot of custom stuff.. its only my first car too. But these civics are soo fun to mess with. I am just going with my Type JDM Projector Headlights, gonna mold em in after my Lude tails are finished. I'll have that in my projects page too :)

el loco since this thread started off with "would these fit" i assumed that the person starting the thread knows nothing about custom fabrication of tail lights. so i than said it would cost 1000 or more to have them done. because anybody who asks of theres tails would fit clearly has no clue about custom fiberglass (no offense to the thread starter. shit i would have no clue where to start. not only that you would have to cut into the hatch or the rear bumper and that would be even harder to do.

Originally posted by T-Mo
...Oh and I am a chick not a dude ;)

Cool another chick with a 4th gen....I think you, LuckyLisa, and LadyNRedSi make 3 - still pretty rare but we are getting a few in here...Sweet! Welcome!! :wave:

sorry this has nothing to do with the original subject of this thread...except for the sweet ass 4-door Melt posted..Mmmm b16 lookin' sedan hood (raised cowl), one piece headlights and stock fog lights.., and look how clean that front grill looks - sweet!! :bloated: <-- using the drool effect in this particular instance.

- true -

but maybe you have a friend or family member tha knows somin bout that kinda stuff.. jus a suggestion