Issue installing new plugs in '03

I am going from underneath and can get to all three plugs. My current problem is that I can't get the old plugs loose. Any tricks or advice? Thanks

See my post on the bottom. If you need more instructions please email me at [email protected]

Jeff

You can get them from the top,unbolt the coilpack and move the engine forward.

you have to bump the ratchet handle to get the plug loose. the plugs are easier if the engine is cold. as a warm engine makes the plugs harder to loosen.and a swivel makes it a lot harder to control the ratchet. once you have the plugs loose switch to a short handled ratchet which will give you more room to turn the ratchet.

Ok, I got to them from underneath. Can't image it could be easier to go from the top. Used a 4" extension. I had access to a pit that I could park the van over, made the job much easier. Finished in 45 minutes. Thanks for the help and advice.