ABS Sensor cable location

Does anyone know were the multi-plug connection is for the front ABS wheel sensors? I found the rear multi-plug connectors under the rear seat as described in Haynes service book but there is no location reference to the fronts.

My service manual says:

Front:
Removal:
1. Raise vehicle on hoist.
2. Remove front brake anti-lock sensor retaining bolt and front brake anti-lock sensor from front wheel knuckle.
3. Disconnect front brake anti-lock sensor wiring from bracket on front shock absorber.
4. Remove front fender splash shield.
5. Disconnect front brake anti-lock sensor connector.

The rear is underneath the rear seat cushion like you said.

Ya, I found that same statement under replacement. I was looking in Test.

Thanks

I have an ABS light which codes out to the hyd pump controller and all 4 wheel sensors, I was testing the wheel sensors before changing them. I've already pulled the hyd pump controller.

Q. Are these related, as in; if the controller is bad, it will show the sensors as bad? The 2 in the rear checked good.