95 Suburban Seats

Good day, all.

I'm taking care of the last little annoying things wrong with my 95 Burb, and ran into a little problem that I'd like to run by you all. The inboard arm rests on the front seats are loose. I attempted to remove the seat back panel to hopefully access the bolts, but it doesn't want to come off. Do you know of any tricks to get this panel off so I can tighten things up? I was able to pry the panel back, but it won't come off all the way, and I don't want to break anything in the process. Any input would be greatly appreciated.

I believe these seats interchange with most C/K models as well, which is why I'm posting here, too.

Joe

You might try posting in the Nonspecific area and/or the vans since these are bucket seats and might be used on other vehicles. A pic or two might help out as well.

You've hit one of those odd, weird problems....congrats & good luck!

I couldn't find any reference to removing the seat back in my factory manual. Your seats are the same as those in pick-up trucks, except that the burb seats have an arm rest on each side, but I've never seen more than one arm rest per seat on pick-up bucket seats. I have a set in my 92 K2500 EC c/with correct EC console all out of a burb. I used the burb high back buckets in lieu of the buckets I had scavenged out of a pick-up as the seats I had first didn't have any arm rests and had low backs.