92 Riv tranny problem
dksob81
01-09-2009, 06:46 PM
I am working on a 92 Rivieraw/ a 3.8L engine. well when you put it in drive and take off you just about gotta floor it to get it to move, it honestly feels like the brakes are locked up but I had it up on the lift and the wheels all spn freely, any ideas?
Joe
Joe
dksob81
01-10-2009, 01:24 PM
nevermind, i figured it out....
the fuse for the ECM was blown and this fuse also power the TCC - so there was no TCC lockup and thats why the car had to be reved so high before it would move. the fuse was a 15 amp #6 in the fuse panel on the passengerside of the center consol. that took care of the problem.
the fuse for the ECM was blown and this fuse also power the TCC - so there was no TCC lockup and thats why the car had to be reved so high before it would move. the fuse was a 15 amp #6 in the fuse panel on the passengerside of the center consol. that took care of the problem.
Automotive Network, Inc., Copyright ©2026