to much gas
danblai01
01-08-2009, 08:23 AM
i have a 94 geo metro that has a problem spewing gas out the top of the throttle body, thought it was a blown head gasket but have installed a new one and it is still doing it help please...
doug2060
01-08-2009, 08:53 PM
Is it coming upward from the fuel injector? Or is is being spit back out of the intake? Did you check your valves and timing? Please explain in detail...
leonbentz
01-08-2009, 09:26 PM
I think your FPR is punctured.
Holy Sh*t, you replaced a head gasket, before coming here? So sorry we couldn't have saved you the trouble, but yea....check your Fuel Pressure Regulator. It likely has a hole in it. Furtunately, they're cheap and simple to replace. Once you remove the air cleaner, you'll see a little square cap with 4screws holding it down. That is where your FPR is.:smokin:
I hope this helps.
Leon
Holy Sh*t, you replaced a head gasket, before coming here? So sorry we couldn't have saved you the trouble, but yea....check your Fuel Pressure Regulator. It likely has a hole in it. Furtunately, they're cheap and simple to replace. Once you remove the air cleaner, you'll see a little square cap with 4screws holding it down. That is where your FPR is.:smokin:
I hope this helps.
Leon
danblai01
01-08-2009, 09:36 PM
thanks, i fixed that problem, it was my timing belt out by three notches. BUT i said BUT now that i had it running great after adjusting that, i put the crank pully back on and then hte alternator belt it will not start at all. it will turn over , it is getting gas and fire, but will not run.
doug2060
01-09-2009, 12:03 AM
Your spark plugs may be fouled.
leonbentz
01-09-2009, 12:39 AM
thanks, i fixed that problem, it was my timing belt out by three notches. BUT i said BUT now that i had it running great after adjusting that, i put the crank pully back on and then hte alternator belt it will not start at all. it will turn over , it is getting gas and fire, but will not run.
:runaround: oooohhhh, sorry, I'm lost now. You put the crank pully on and alternator belt and it won't run? I don't quite understand how that could have affected it.
:runaround: oooohhhh, sorry, I'm lost now. You put the crank pully on and alternator belt and it won't run? I don't quite understand how that could have affected it.
danblai01
01-09-2009, 06:35 AM
:runaround: oooohhhh, sorry, I'm lost now. You put the crank pully on and alternator belt and it won't run? I don't quite understand how that could have affected it.
leonbentz (http://www.automotiveforums.com/vbulletin/member.php?u=411256) you my friend appear to be an ass, i am a pretty fair mech, but i am stumped on the crazy little metro, thanks anyway but i think you are here to just have a little fun with peoples ingnorance.
leonbentz (http://www.automotiveforums.com/vbulletin/member.php?u=411256) you my friend appear to be an ass, i am a pretty fair mech, but i am stumped on the crazy little metro, thanks anyway but i think you are here to just have a little fun with peoples ingnorance.
leonbentz
01-09-2009, 07:17 AM
Sorry, don't mean to be an ass, but this really stumps me too. Don't worry, I had my fun dealing with a few things, but your case looks odd. There a good possibility that your injector could even have a bad o-ring. I believe there are two of them on it and if any one of them go bad, then it will spew out gas.:smokin:
Automotive Network, Inc., Copyright ©2026
