1992 Olds 3.1 no start

I have replaced the fuel pump and testing it at the rail. It has 42psi. Car will crank just fine, but won't start. If I spray fuel into the TB it will run. Is there a way to test the fuel injectors to see if they are getting power? Any other ideas would be appreciated!! Thanks!

Get a noid lite on the injector connector or check for 12v at the harness going to them for easier access, do you have good stong spark?

Check the wiring from your Crank position sensor that runs up the rear of the engine to the ICM. Two wires are coiled around each other. They sometimes lay on the exhaust and get crispy.