Honda Prelude help....please

Alright, heres the problem. I hope there are some of you out there who have put on a cold air intake for a 97-01 lude. My lude's a 98 abse modle and this is the problem. I have taken off the whole stock air system...but there is one part that is very troubeling to me. There is a metal tube that came off of the intake that seems to go into the cam of the engine and theres another metal tube connected to the side of that which seems to go more towards the bottom of the intake maniford. The other end of that I have no idea where it goes but my problem is that they are connected together and I want to know what the second tube is for....I dont wanna pull it off and then fuck my sensors or somethin.. If you have any experience in this please please leave me somethin....Thanks. If you dont understand it ill rewrite it.

I'm not really familiar with Accords,but the top one that goes into your valve cover is the blow by and I believe,but not a 100%,but the bottom may be for your Intake Air Bypass.I know the GSR has the secondary intake and I know one of the Accords has it,but not sure if your model is the one.I hope this helps somewhat,but you really should get a Helms for your model,it is the best mod for your car. www.helminc.com

I think your car has the same thing mine does. I has a metal tube going from the intake the valve cover, and another metal tube attached to that which goes right by the injectors and down into someplace i cant see? i just disconnected the tube from the intake to the valve cover and replaced it with new hosing, and let the other tube connected. It looks like crap cause i have that one tube just hanging there, but oh well.

Yea, that sounds exactly like what mine has..its a pain in the ass....