1995 Quest van ?
oldblu65
12-05-2008, 10:50 AM
This may sound like a stupid question , but .... is a 1995 Quest van's transmission an overdrive ? It belongs to my daughter and I've driven it a few times . I noticed on the gear indicator it says D,1,2 . This indicates a three speed tranny to me . Also , it has a long hesitation between the 1st gear and 2nd gear when accelerating. Sometimes it will go up to around 4000 rpms before it shifts . Sometimes if you left off the accelerator , it will shift quicker , sometimes it doesn't have any effect at all . Any help will be appreciated !:confused:
tempfixit
12-05-2008, 02:13 PM
This may sound like a stupid question , but .... is a 1995 Quest van's transmission an overdrive ? It belongs to my daughter and I've driven it a few times . I noticed on the gear indicator it says D,1,2 . This indicates a three speed tranny to me . Also , it has a long hesitation between the 1st gear and 2nd gear when accelerating. Sometimes it will go up to around 4000 rpms before it shifts . Sometimes if you left off the accelerator , it will shift quicker , sometimes it doesn't have any effect at all . Any help will be appreciated !:confused:
Your transmission is a 4 speed (overdrive). On the gear selection lever there is a button on the end, pushing this button will turn the OD of and on.
Here is a link for the FSM for the Quest/VIllager:
http://www.nicoclub.com/FSM/
scroll down to Quest and click on it and choose year then go to AT section (Automatic Transmission)
Have you checked for any codes? Manual I believe also has procedure for checking codes.
Also read the thread just below yours on hard shifting it maybe the same problem.
Post codes and hope this helps
Your transmission is a 4 speed (overdrive). On the gear selection lever there is a button on the end, pushing this button will turn the OD of and on.
Here is a link for the FSM for the Quest/VIllager:
http://www.nicoclub.com/FSM/
scroll down to Quest and click on it and choose year then go to AT section (Automatic Transmission)
Have you checked for any codes? Manual I believe also has procedure for checking codes.
Also read the thread just below yours on hard shifting it maybe the same problem.
Post codes and hope this helps
Automotive Network, Inc., Copyright ©2025
