cooling fan wont turn off.
moms van
11-25-2008, 06:00 PM
First of all i searched the posts and could not find any info on this subject. I have a 97 villager and just recently replaced the timing belt and waterpump, after i got all back together i noticed the cooling fan is not shutting off, someone told me that if the coolant systems was not bleed correctly this could cause this problem,so i made sure and it is fine, so next step i put in a new temperature sensor and still the fan runs, well im out of ideas, so if anyone has suggestions please write back. thank you, Dave. P.S. buy the way i believe this problem was before the work because the connector where the fan is looked a little melted, and i did repair that.
tempfixit
11-26-2008, 03:41 PM
First of all i searched the posts and could not find any info on this subject. I have a 97 villager and just recently replaced the timing belt and waterpump, after i got all back together i noticed the cooling fan is not shutting off, someone told me that if the coolant systems was not bleed correctly this could cause this problem,so i made sure and it is fine, so next step i put in a new temperature sensor and still the fan runs, well im out of ideas, so if anyone has suggestions please write back. thank you, Dave. P.S. buy the way i believe this problem was before the work because the connector where the fan is looked a little melted, and i did repair that.
Remove the AC Relay and see if it still runs.
Have you checked the 1 low fan relay, and 2 hi speed fan relays?
The burn't wire connector you repaired may have fried the ECM, hopefully not. Read the thread below I believe it will help you very much. One of the people in the below thread disconncected his ECM, waited a few minutes and reconnected it and it rebooted the ECM and fan operated normally since.
Here is a thread in another forum that talks about the same problem:
http://autos.groups.yahoo.com/group/villagerquest/message/39913
If you can not get the thread you may have to register but do not frett it is also free. villager/quest@yahoogroups.com. It also has a file in it that has many posts on different itemes on the villager/quest.
You can also do a search in that forum which will give you some differnt ideas to check.
Keep us posted and good luck
Remove the AC Relay and see if it still runs.
Have you checked the 1 low fan relay, and 2 hi speed fan relays?
The burn't wire connector you repaired may have fried the ECM, hopefully not. Read the thread below I believe it will help you very much. One of the people in the below thread disconncected his ECM, waited a few minutes and reconnected it and it rebooted the ECM and fan operated normally since.
Here is a thread in another forum that talks about the same problem:
http://autos.groups.yahoo.com/group/villagerquest/message/39913
If you can not get the thread you may have to register but do not frett it is also free. villager/quest@yahoogroups.com. It also has a file in it that has many posts on different itemes on the villager/quest.
You can also do a search in that forum which will give you some differnt ideas to check.
Keep us posted and good luck
Automotive Network, Inc., Copyright ©2025