How to paint mesh ?
Vric
03-17-2003, 05:36 AM
Hi
How do you paint mesh ? I have tryed with Spray can, and some small hole get filled, so how ??!?!
Like this one is silver mesh :
http://www.spc.org.uk/toyota/i/toyoto-celica-gt4-03.jpg
thanks
How do you paint mesh ? I have tryed with Spray can, and some small hole get filled, so how ??!?!
Like this one is silver mesh :
http://www.spc.org.uk/toyota/i/toyoto-celica-gt4-03.jpg
thanks
Hiroboy
03-17-2003, 05:39 AM
Airbrush Semi Gloss Black and them airbrush, AlcadII Stainless Steel
paint over top, Rattle cans will only block it up, as I found trying to prime some once.
paint over top, Rattle cans will only block it up, as I found trying to prime some once.
k_dog
03-17-2003, 05:42 AM
I use paint markers:
freakray
03-17-2003, 05:45 AM
The only addition I can add is that when I paint mesh, I give it a shot of primer to help the paint stick to it.....
Other than that, what Steve said about painting it is right on the money :)
Other than that, what Steve said about painting it is right on the money :)
k_dog
03-17-2003, 05:50 AM
I have noticed when I spray mesh, the bubbles get filled because of spraying too closely. This may have been you're problem.
Brian
Brian
Vric
03-17-2003, 06:01 AM
Originally posted by k_dog
I have noticed when I spray mesh, the bubbles get filled because of spraying too closely. This may have been you're problem.
Brian
humm could be y problem yes.. on a mesh I have tryd, only 5% of the hole was filled or so..
and last thing, where do you buy mesh like tamiya ? :D I will run out of stock soon :D
I have noticed when I spray mesh, the bubbles get filled because of spraying too closely. This may have been you're problem.
Brian
humm could be y problem yes.. on a mesh I have tryd, only 5% of the hole was filled or so..
and last thing, where do you buy mesh like tamiya ? :D I will run out of stock soon :D
k_dog
03-17-2003, 06:13 AM
Here's where I get mine:
http://www.modelcargarage.com/mcg_display_item.cfm?m=704
http://www.modelcargarage.com/mcg_display_item.cfm?m=711
They can be ordered from Model Car Garage for fairly cheep!
Brian
http://www.modelcargarage.com/mcg_display_item.cfm?m=704
http://www.modelcargarage.com/mcg_display_item.cfm?m=711
They can be ordered from Model Car Garage for fairly cheep!
Brian
Vric
03-17-2003, 06:19 AM
Originally posted by k_dog
Here's where I get mine:
http://www.modelcargarage.com/mcg_display_item.cfm?m=704
http://www.modelcargarage.com/mcg_display_item.cfm?m=711
They can be ordered from Model Car Garage for fairly cheep!
Brian
thanks
3.99$ for 100 peice of 3"/2" ???? if yes, it's not cheap, it's nearly free :D
Here's where I get mine:
http://www.modelcargarage.com/mcg_display_item.cfm?m=704
http://www.modelcargarage.com/mcg_display_item.cfm?m=711
They can be ordered from Model Car Garage for fairly cheep!
Brian
thanks
3.99$ for 100 peice of 3"/2" ???? if yes, it's not cheap, it's nearly free :D
freakray
03-17-2003, 06:20 AM
Originally posted by Vric
thanks
3.99$ for 100 peice of 3"/2" ???? if yes, it's not cheat, it's nearly free :D
The 100 refers to the mesh density, I don't recall the exact count, but the higher the number the finer the mesh.
If it were for 100 pieces they would be constantly sold out:D
thanks
3.99$ for 100 peice of 3"/2" ???? if yes, it's not cheat, it's nearly free :D
The 100 refers to the mesh density, I don't recall the exact count, but the higher the number the finer the mesh.
If it were for 100 pieces they would be constantly sold out:D
Integra14
03-17-2003, 11:10 AM
hiro boy, what size mesh is that on ur celica, looks great
Automotive Network, Inc., Copyright ©2025