Removing Dash?
habit
10-02-2008, 11:50 PM
I need a step by step process for removing the dash to get to the heater core to replace. I have a 2000 grand am Gt. If anyone could help it would be greatly appreciated as I'm kind of in a bind right now and really need to get this fixed. Thanks.
habit
10-02-2008, 11:56 PM
Sorry. Again its the dash I can't find any information on removing. Not the heater core.
I'm not too experienced in cars, so all the help would be great.
I'm not too experienced in cars, so all the help would be great.
xeroinfinity
10-03-2008, 01:36 AM
Welcome to AF!!
So is it your heater core that needs replaced ?
Cause you dont have to or wanna even take the dash out for this.
Here is a link for the heater core removal/install...
http://www.automotiveforums.com/vbulletin/showthread.php?t=672471
So is it your heater core that needs replaced ?
Cause you dont have to or wanna even take the dash out for this.
Here is a link for the heater core removal/install...
http://www.automotiveforums.com/vbulletin/showthread.php?t=672471
habit
10-03-2008, 07:24 PM
Haha okay thanks for the link.
How do I go about removing the console and glove box..sorry I'm not too experienced in cars. Only doing this to save the money..
How do I go about removing the console and glove box..sorry I'm not too experienced in cars. Only doing this to save the money..
xeroinfinity
10-04-2008, 11:22 AM
You dont need to remove the console or glove box to change the heater core.
But the console is held with several screws. First you need to remove the shifter, a horseshoe clip is in the front of the handle, it just pulls out.
You must pop the top off the console to access most of the screws. Thier are 5-6 clips along the longer sides holding the top of the console on, a panel tool wroks best. Inside the arm rest compartment are more screws.
The glove box is just held in with screws around the opening.
Good Luck
But the console is held with several screws. First you need to remove the shifter, a horseshoe clip is in the front of the handle, it just pulls out.
You must pop the top off the console to access most of the screws. Thier are 5-6 clips along the longer sides holding the top of the console on, a panel tool wroks best. Inside the arm rest compartment are more screws.
The glove box is just held in with screws around the opening.
Good Luck
Automotive Network, Inc., Copyright ©2026
