94 intrepid tranny problem PLEASE HELP

I Am Currently Putting A Trans In My Intrepid And Have Run Into A Problem. My Torque Converter Is In Place But Is Pushing The Flywheel Into The Oil Pan. If Anyone Can Help Please Do So. Im Hurting On This One. Im About To Send It To The Boneyard And Dont Want To Do That. So Please Help.

I Am Currently Putting A Trans In My Intrepid And Have Run Into A Problem. My Torque Converter Is In Place But Is Pushing The Flywheel Into The Oil Pan. If Anyone Can Help Please Do So. Im Hurting On This One. Im About To Send It To The Boneyard And Dont Want To Do That. So Please Help.

If the torque converter is pushing the flywheel towards the oil pan you best check the flywheel for cracks on it or the tranny you have is not the correct one. Is it the same tranny that was in the car originally or is it a traany from a different vehicle? Are you sure the converter is properly in place.

i puled it from a 95 intrepid with the same 3.5. im pretty sure its in place. it wont go in any further. i already cheacked for any cracks or chips. so i dont know what else to do. is there a plate to go between them. like a spacer or something? is there a certian way the converter has to go in or does it not matter?

Is the converter the one that came with the tranny or is a remanufactored one? Been a while since I put one on but it you should feel it when converter seats with the tranny oil pump. Maybe converter doesn't mate to the tranny.

its the one that came with the trans when i pulled it. n i felt it kinda pop into place.

got it in thanx man