Anyone need decals?

panoz26 and I are in the process of "redoing" our cars, sorting them, all new paint and body work, as part of that I will be remaking all the decals to match our color schemes.

If anyone needs any of the exisitng logos, I am doing mine all in monotone, but I can do them in full color.

Price would be $5-6 each for the smaller sponsor logos

Here is a pic of the first couple i have done.

I am also making large Panoz logo's that will likely be $20-25 each. Or if you need any other vinyl work done let me know. I finally have all my plotter gear online!
http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=94016&g2_serialNumber=2

couple more for the race car....

http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=94059&g2_serialNumber=2

the silver logos will be my "hood ornament" and for the trunk

How large a Panoz logo can you do? Not the crest, the other....

They look great Eric -- good job!

How large a Panoz logo can you do? Not the crest, the other....

up to 23-24" tall x however wide i need too.

up to 23-24" tall x however wide i need too.

Awsome.... will be in touch when I'm ready for decals. Thanks! gary

here is the Panoz Hood Emblem on my car:



http://www.dcazin.c4-motorsports.com/PanozWeb/img_7059.jpg

Car looks great - logo decal is very nice.

Here are a couple of questions that may be helpful to others as well. I can't tell by the photos.

Are they pre-cut?
Are these wet applied or press-on?
Can you reproduce from any pattern/logo?
Are you able to produce almost any color?

Thanks in advance.

bob

Car looks great - logo decal is very nice.

Here are a couple of questions that may be helpful to others as well. I can't tell by the photos.

Are they pre-cut? precut? not sure what you mean? they cut on my vinyl plotter and attached covered with transfer paper ready to apply. I precision cut them in house

Are these wet applied or press-on? they are basically peel and stick, no water needed, although for larger decals i use a soapy water solution to allow getting them in place and allows it to move around while applying. once its were you want it, squeeze the water out and let dry(or i sometime hit it with a heat gun set to lo or a hair dryer.

Can you reproduce from any pattern/logo? pretty much, depending on quality of the image you send and complexity i may have to charge an art fee, but i made almost all of the above logos from a simple jpg taken with my digicam of the decals on my car before i stripped them off.

Are you able to produce almost any color? yes just about any color in the rainbow, price on specialty colors will vary.

i just do this on the sidem its something i enjoy so i'm not looking to get rich so i can almost guaretee i'll be cheaper than anywhere else.

Thanks in advance. - your very welcome.

bob
....

PM sent.

http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=94065&g2_serialNumber=2

This big enough? 34" tall x 23" wide

I ran out of green so waiting for more to arrive.

Hey Eric. I have been having issues sending PM's lately. Did you get the one I sent about a large decal?

This big enough? 34" tall x 23" wide

Looks Good!

Hey Eric. I have been having issues sending PM's lately. Did you get the one I sent about a large decal?

I did get it, I will respond back shortly, I have been swamped working on our largest trade show ever 14k people! so been crazy busy.

Squerly, the green vinyl came in I will hopefully get yours done before i leave on saturday and get it sent out.

Squerly, the green vinyl came in I will hopefully get yours done before i leave on saturday and get it sent out.http://thesquirrelboard.com/forums/images/smilies/2thumbs.gif

I did get it, I will respond back shortly, I have been swamped working on our largest trade show ever 14k people! so been crazy busy.

Squerly, the green vinyl came in I will hopefully get yours done before i leave on saturday and get it sent out.

Thanks Eric, keep me posted! :thumbsup:

Here are some more shots of Eric's vinyl work (plus one sexy car)....:smile:

http://www.dcazin.c4-motorsports.com/IMG_7075%20(Large).JPG

http://www.dcazin.c4-motorsports.com/IMG_7076%20(Large).JPG

http://www.dcazin.c4-motorsports.com/IMG_7080%20(Large).JPG

Oh my, that is one nice car...

Oh my, that is one nice car...

Thanks! still not finished -- but, it's "together"

Lookin" GOOD
The decals are nicely done. May be some in my future :wink:

one of my favorites...

http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=94306&g2_serialNumber=1

one of my favorites...

Haha, that's great! :rofl:

FInished pic of the LARGE Panoz logo I made for Squerely

http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=94334&g2_serialNumber=3

Let me know if you need anything "custom" I can do just about anything that can be cut into vinyl.

custom work has a $25+ art fee, price is depending on # of colors and whether it has to be custom drawn or the quality of the "sample image"

Where's mine? I need them for the trailer........ hurry up

Where's mine? I need them for the trailer........ hurry up

haven't I done enough for you? lol

I cut a bunch of small full color panoz logo's @ 4' tall, just like the large logo above except without the white outline...

let me know if anyone wants any and I'll PM you prices.

BTW, I forgot to give the appropriate thumbs up on the decals I got from Eric, their top notch! I'll certainly order more when the time comes. Thanks Eric.

BTW, I forgot to give the appropriate thumbs up on the decals I got from Eric, their top notch! I'll certainly order more when the time comes. Thanks Eric.



Thanks, I was wondering about that, I hadn't heard from you so I thought either you hated them, or they got lost in the mail! lol

Thanks, I was wondering about that, I hadn't heard from you so I thought either you hated them, or they got lost in the mail! lol

Sorry man, I'm an inconsiderate ass sometimes. I've been building a 40X60 garage for my GTS and my P-cars. The building is built, power is in, benches are together, air compressor is set up, tools are on the walls, etc. but I haven't started putting the cosmetic part of the interior together. But when it's finished, I've got a really BIG Panoz decal to hang in the Panoz bay!

Sorry man, I'm an inconsiderate ass sometimes. I've been building a 40X60 garage for my GTS and my P-cars. The building is built, power is in, benches are together, air compressor is set up, tools are on the walls, etc. but I haven't started putting the cosmetic part of the interior together. But when it's finished, I've got a really BIG Panoz decal to hang in the Panoz bay!

Seriously, no worries, I was just only kidding... Sounds like a nice setup!! Can't wait to see it and see my HUGE decal in its new home!

Eric, please send me pricing info on the 4" Panoz decals. Thanks.

Can you make the Panoz crest in any other colors?

Can you make the Panoz crest in any other colors?

I can make anything is just about any color you want.


Colors I have in stock...

Black
red
blue
white
green
bronze
silver
dark grey/gunmetal

How much for a black Panoz crest logo for my front bumper?

So, some ballpark pricing.

Small Single color panoz crest $5
Small full Color panoz crest $10 (was $12)
Single color small panoz text $5
LARGE Full color Panoz logo $65
LARGE Single Color Panoz logo $20
Single color name plates $5
Small 5-7" Track maps - $5 VIR, CMP, Roebling, Rockingham, Road Atlanta so far other may be available upon request.

"Panoz Racing Series" 2 color $10
Any of the original Sponsor decals from the Series cars $7
"Flip me over" decals $6
Tow and jack red decal set $7 (for both)

Just some quick ballpark pricing, quantity discounts may apply! :-D

I can also make racing stripes, and just about any other graphic decal you want...
Here is a set of racing strips I'll be doing on my car....

http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=94387&g2_serialNumber=2

Just PMed you... hold up on the black crests. I didn't realize a full color one was available. Also interested in "tow" and "jack" decals in white if you have them.

Here are some more pics and an idea of sizes, honestly i can make any of them pretty much any size you want, but these are what i have precut.




http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=96325&g2_serialNumber=2

http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=96304&g2_serialNumber=2

Are your multi color decals printed or cut vinyl? Looks good...If it is cut vinyl it seems like alot of work.

Just looked at your other decals, definitely cut vinyl. Great work :naughty:

Just looked at your other decals, definitely cut vinyl. Great work :naughty:

Got my Decals - man they look great ! Thanks !

Got my Decals - man they look great ! Thanks !

PIC's or ban.....

I got mine too.... but haven't installed them yet, thanks :)

Eric,

We have one last decal to apply to our car. It's yellow green and cresty! Have you seen it? :dunno:

As soon as I do - I'll post a good view of it here for ya cause you know:useless:

bob

Eric,

We have one last decal to apply to our car. It's yellow green and cresty! Have you seen it? :dunno:

As soon as I do - I'll post a good view of it here for ya cause you know:useless:

bob

SO where's the pics?

:useless:

Eric:

How large is a large color Panoz decal???

Chris M

yes, i am tired of telling people what kind of car it is. I would like to buy 2 "panoz" decals, one for each side of the hood.

Eric:

How large is a large color Panoz decal???

Chris M you want the panoz lettering or the large panoz logo?

The Panoz logo is @ 32" tall and 22ish wide....

the word "Panoz" is @ 22-23" tall and 40" wide, but i can make either of them just about any size smaller than those dimensions as well

same size you have on your car, but in white lettering and only panoz, not panoz racing

same size you have on your car, but in white lettering and only panoz, not panoz racing


Ok, so, you by "white lettering" do you want a white outline with the red lettering, or single color all white?

example of the red/white
http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=96322&g2_serialNumber=2

and a crappy pic of it on devins car

http://dcazin.c4-motorsports.com/track%20pics/415894755_4o3gY-M.jpg

single color all white

single color all white
PM sent

Uwe W, Here is your decals, all done, just need to put on transfer tape and ship out tomorrow, they came out great!

http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=105852&g2_serialNumber=2

Here are some more of the sponsor logo's I can do...



http://www.extremespeedonline.com/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=105864&g2_serialNumber=2

Eric <------ THE MAN!!!!!!

Eric <------ THE MAN!!!!!!


Awww schucks!:iceslolan

Notice I added your AFR logo.

for the record I had to "hand" draw each of the logo's(ok computer draw, but close) lol

for the record I had to "hand" draw each of the logo's(ok computer draw, but close) lolA man of unbelievable talent and fortitude... :)

Eric, can you make headlight decals ?

Eric, can you make headlight decals ?

Ted, just buy one of these.

http://jmimac351.smugmug.com/photos/463702000_WEqRP-XL.jpg