Looking to buy GTRA

I've found a few GTRA cars for sale and I was wondering what the going rate (Purchase price) for good solid GTRA cars is (are)?

Any help would be appreciated.
These are Texas cars with hours ranging from 200 to 350 hours hobbs.
Cars have good performance street tires, one has a new engine.

Thanks,
Mark

look to pay $15,000 for a car that needs a lot of attention, ie it needs a complete nut and bolt along with some cosmetic attention. A ready to go car should run over $20,000. this is new territory for us as far a market price goes, but most of us paid 13,000 to 19,000 for our cars direct from Panoz.

$50,000 :smokin:

We have the following car that is 75% new, built by Panoz

http://www.pd-go.com/index.php?action=website-view&WebPageID=19275&WebSiteID=409

Good luck
James @ wirewheel

We have the following car. 75% new. Rebuilt by Panoz

http://www.pd-go.com/index.php?action=website-view&WebPageID=19275&WebSiteID=409

Good luck.


James
wirewheel

Mark, kidding aside that car James posted looks like a good one. Clean ones are getting harder to find for a good price. "Low Hours" is a Hobbs meter replacement away. Look for a chassis number, whether the frame mods have been done, etc. Get under the car and look at the long frame rail to see if it's one piece / been clipped? Answers in those categories is not a deal breaker, but it can give you an idea of what you are really looking at. Does a new motor really matter if you plan to modify it? etc...

No matter what you get, you'll need to go through it yourself. And they are a hell of a lot of fun.

I have a GTRA for sale with too many new parts to list
It has a new red paint job. For more information my
email address is [email protected] . I was Body Shop
Manager for Panoz and my wife was Parts Manager.