Fiero Seats, and a couple of other questions,help

aight, my friend jus got two bucket seats froma feiro, now i have a stn civic hatch and i was wondering if anyone knew how hard that swap would be?.....also im looking for a teg console, i want to know what i need console wise, like do i swap everthing from the center vents and down to the e-brake, im so confused on that. two more questions, sorry for all this.........................my car did'nt come with a tach, im getting a Si cluster, but since my car never had a tach, is the wiring for it already there?, it makes no sense. last one, thanks for bareing with me...... my car ain't got no clock neither, i wanna swap that from an Si center vent, now is that a direct fit and how do i go about wiring the clock?..........i hope some of these questions get anwsered but i doubt it............peace ya'll.:alien:

For the Integra Console all you need is from the cupholder down, not any vent part. And for the Si Cluster yes the wiring is already there.

the car is pre-wired for the clock. the center vents just pull out and the clock gets mounted with two screws, and the plug is already there.

yes the cluster is Plug-n-play but remember if you have an 88-89 get that year si cluster then or if you have a 90-91 get that yr cause if its not the same yr cluster you will have to do wiring

This might help you for the cluster...

http://www.fourthgenhatch.com/sigaugecluster.html

can we use the regular wiring for the dx cluster into the Si cluster? or we gotta get the Si cluster wiring also?

Anyone know about the seats and how hard it would be?

Originally posted by silver89civic
can we use the regular wiring for the dx cluster into the Si cluster? or we gotta get the Si cluster wiring also?

The Si and DX wiring are exactly the same, it's just that the DX cluster has nothing for one of the wires to plug into, Si does.

thank you *thumbs up*

Originally posted by FourthGenHatch
This might help you for the cluster...

http://www.fourthgenhatch.com/sigaugecluster.html

i got one of those! :D in km/h tho lol,
yes just get the right cluster and then plug in the two plugs that are originally there from your car, no wiring needed at all! its a Very simple installation because i was able to do it too lol :D

Originally posted by Carnivore
Anyone know about the seats and how hard it would be?

dont be lazy it takes like 10 minutes to know if they will go in or not, just get one and try that out, probably the drivers seat because its most important and for me my drivers seat was the hardest to fit. but if it doesnt exactly line up work with a lil, see how many u can get to bolt in, if u can get 1 from top two and 1 from bottom two, then just take a drill and make the whole of the closest third one a lil bigger/extend it so u can get a third one in, just tighten real tight and u don't need the fourth one in, mine doesnt move at all