SES light and trembling/vibration on 02 TB

I wanna drive my truck to the dealer to see what the problem is .... its 30 min ride and I dont want to do more damage that I dont know Im doing...

should I be concerned?

If you are not sure they make flatbed tow trucks to get them in for repair.
Or give us some good details on what it is doing or not doing.
MT

I have sent him a PM that advices him based on what his problem was. BTW Kenudigme, I am sure you can see the confusion created by double posting your issues, keep this in the open forums as I suggested. Based on your problem description, go ahead and drive it 1/2 hour.

I have sent him a PM that advices him based on what his problem was. BTW Kenudigme, I am sure you can see the confusion created by double posting your issues, keep this in the open forums as I suggested. Based on your problem description, go ahead and drive it 1/2 hour.


OK!!! ... just wanna say thanks for welcoming me to the forum and also advising me on my vehicle situation.

I drove it there - I just didnt push the speed b/c the less I pushed the speed the less the SES light would flash. I could cause some type of damage to my 'cat converter'. Everything was cool though!
THANNNKSSS!
I am new to this forum.... so I apologize for the confusion I may have caused.... but anyway, my car was trembling and the SES light came on - it would flash when I did over 40mph. I got an AUTOZONE diagnostic which told me I had a misfire in cylinder #3 (P0303) so I got a tune up but it didnt help the trembling and SES was still on... I took it to the dealership this morning and their diagnostic detected a bad coil ; changed it right away- free of charge; sent me home feeling so much better ............

Great, glad to help, not an unusual problem, plus you learned about the diagnostic process and our forum all at once.