Rear turn signal question

This is probably a simple question for some of you but I'd rather ask a stupid question that tear up something with the arm strong method. How does one access the left rear tail light assembly to replace the turn signal bulb. Any advice would be greatly appreciated. Sorry. In my haste to get help I forgot the most important info. We are talking about a 2004 Chevy S10

Open tail gate and look for a couple of screws on side of tail light holding it in.
Besides the screws it may have a couple of clipsholding it in.
Remove screws and pull back/out on light assembley.
MT

Thanks a bunch. When I looked at it last PM it was dark and the truck is black so I didn't see anything. I looked again this AM and found the two screws you mention. Preciate the reply!

Thanks a bunch. When I looked at it last PM it was dark and the truck is black so I didn't see anything. I looked again this AM and found the two screws you mention. Preciate the reply!

You are welcome.
After the two screws are out you may have to pull back/out some to get it out.
Good luck
MT