didn't get the d16z6 but the d16y7 help?
kenneyd
03-07-2003, 05:01 PM
i have a 94 lx d15b7, just bought a 97 d16y7 going to turbo, have most of my turbo parts, just waiting on a few more. What all will i need to make this engine work in my car. I know what i need dealing with the turbo, just need to know what i need to make this engine run in my car, because the intake is different, and it maybe some more things that are different that i just dont know.
jcrx
03-07-2003, 06:15 PM
Other than the OBD conversion,you should have no problems.
kenneyd
03-08-2003, 12:34 PM
how do you do it. the OBD conversion
jcrx
03-08-2003, 04:08 PM
Wiring isn't my specialty,but the plugs are different between the OBD I and OBD II harnesses on the injectors,distributor,and alternator I believe.So you can get new dizzy,inject. and what not,or run OBD conversion harnesses.
SleeperCivic
03-08-2003, 10:25 PM
Yeah....
kenneyd
03-09-2003, 06:57 PM
Thanks for all the info, i'm going conversion harness. Do i get these form honda or where? again thanks for all your help...
SleeperCivic
03-09-2003, 08:53 PM
Might want to consider doing a Y8 manifold swap. If you know what both look like, you'll easily see why the Y8 is a better choice. Here's a link for ya:
Y8 Manifold Swap Instructions (http://www.makuragi.s5.com/civic_99/Y8maniswap/)
Y8 Manifold Swap Instructions (http://www.makuragi.s5.com/civic_99/Y8maniswap/)
kenneyd
03-10-2003, 09:04 AM
i'm going to have to have it man, it might set me back two weeks, but while i have the motor out, might as well ( Y8 ) manifold.
Automotive Network, Inc., Copyright ©2025