changed a head gasket car wont start. need your help
akirmanidis08
05-10-2008, 03:02 PM
Aight so got this 90 CRX with the 1.5 liter
went to change the head gasket, everthing fine. got stuff put back together
now the car will not start. the engine turns over fine with no probems it wont start though
any ideas on what could have been missed for it not to be start?
went to change the head gasket, everthing fine. got stuff put back together
now the car will not start. the engine turns over fine with no probems it wont start though
any ideas on what could have been missed for it not to be start?
slammed89civic
05-10-2008, 03:32 PM
double check your timing
4-Door Flunky
05-19-2008, 11:41 AM
After changing my timing belt, I knew I had it right, but the car wouldn't start. I did a lot of cranking before I finally broke the golden rule of "Never push on the accellerator when the engine's not running" for a fuel-injected vehicle.
I started holding the accelerator down while cranking, and after a minute I heard my first cough, and then it started.
4DF
I started holding the accelerator down while cranking, and after a minute I heard my first cough, and then it started.
4DF
Automotive Network, Inc., Copyright ©2025